Measuring & Installing - Storefront Window LED March 15, 2015 21:18

Step 1:

Decide whether you want to do individual windows or one complete square on all your windows.

Step 2 Indoor or Outdoor?:

Decide whether your going to install these indoor or outdoor?

If Indoor: You will need to purchase our storefront led kits with **TRACKS** 

Storefront LED with tracks:

Multicolor LED with Tracks ---> RGB + Tracks 

  

Single Color LED with Tracks --> Single Color + Tracks

 

   

Once you have purchased your storefront led with tracks. Begin  measuring your sides of the frame or where you plan to install the LED. Cut the lengths that will be needed in order to fit correctly. 

Apply the double sided tape to one of the corners of the "Tracks", mount the "Tracks" to the frame and press firmly, you will be left with one side from the corner guard which faces the outside of the business. Start applying your LED on the remaining side so the LED faces the outside of the business. Be sure to take into account your power cord lenght so your left with the power cord on the bottom corners for accessible plugs. 

Installing Indoor will look:

 

If OutdoorPlan out your installation with a layout so you can end up with the plug on one of the corners or the corner closest to the plugs inside. You will need a drill bit to drill a hole big enough to run your power cord inside. Be sure to ask your landlord before any drilling to be sure its acceptable. Start laying each module from the corner of where you plan to run your power cord, pull lightly to make sure you make nice straight lines, then run your power cord wire inside and plug.

 

Enjoy!